CA4-800D

KEY FEATURES

  • D class power amplifier
  • 4 x 200w @ 4 Ohms
  • Passive cooling
  • 2×4 DSP 48kHz, 24-bit AD-DA 
  • Overload and short-circuit protection
  • Priority on inputs
  • External GAIN per channel, use VC-1

DESCRIPTION

The New CA4-800D is the updated version of the old CA4-600D. We have improved the outputstage by developing a new synchronized amplifier module, this will give much more transparency and clearness in the music. Also we have increased to PSU by 200W upto 800W. The CA4-800 is the best tool for professional system integrators, who require maximum performance and sound quality on a limited budget.

CA-Series amplifiers are based on a modern, high-performance D class topology. This topology provides high efficiency, low heat generation, large output power and together with a switching power supply – light weight and small dimensions. The amplifiers use passive cooling system common to all channels. The natural airflow direction is natural from bottom to top. The amplifier is equipped with a full set of modern protection systems. These include short circuit protection, thermal protection, DC and high frequency speaker protections. The internal DSP is easy to program via USB port on the back of the device using CA-control software. Channel 3 and 4 are also post DSP out ( 3pin phoenics ) for external amplification.

Category:

Additional information

Number of Channels

4

RMS 4 Ohm

4 x 200 W

RMS 8 Ohm

4 x 100 W

Brigde 8 Ohm

2 x 400 W

AC Power

230AC, 50/60Hz

Frequency response

20-20kHz (+-0.5dB, Pnom.)

Total Harmonic Dist

0.02% (1kHz, 8 Ohm)

Damping Factor

>200 ( 8 Ohm, 1kHz)

Signal-to-Noise

96 dB (unweighted)

Weight (Kg)

7.2

Cooling

Forced front to back, incl. dustfilter

Dimensions

478 mm (W) x 44 (H) x 300mm (D)

Maximum Voltage Gain

34 dB

STBY power

5 W

CA-control 2.5

Download

Windows software for CA amplifiers