CA4-600D (out of program)
KEY FEATURES
- D class power amplifier
- 4 x 150w @ 4 Ohms
- Passive cooling
- 2×4 DSP 48kHz, 24-bit AD-DA
- Overload and short-circuit protection
- Priority on inputs
- External GAIN per channel, use VC-1
DESCRIPTION
CA-Series are modern 4 channel amplifiers for professional system integrators, who require maximum performance and sound quality on a limited budget.
CA-Series amplifiers are based on a modern, high-performance D class topology. This topology provides high efficiency, low heat generation, large output power and together with a switching power supply – light weight and small dimensions. The amplifiers use passive cooling system common to all channels. The natural airflow direction is natural from bottom to top. The amplifier is equipped with a full set of modern protection systems. These include short circuit protection, thermal protection, DC and high frequency speaker protections. The internal DSP is easy to program via USB port on the back of the device using CA-control software. Channel 3 and 4 are also post DSP out ( 3pin phoenics ) for external amplification.
Additional information
Number of Channels | 4 |
---|---|
RMS 4 Ohm | 4 x 150 W |
RMS 8 Ohm | 4 x 75 W |
Brigde 8 Ohm | 2 x 300 W |
AC Power | 230AC, 50/60Hz |
Frequency response | 20-20kHz (+-0.5dB, Pnom.) |
Total Harmonic Dist | 0.02% (1kHz, 8 Ohm) |
Damping Factor | >200 ( 8 Ohm, 1kHz) |
Signal-to-Noise | 100 dB (unweighted) |
Weight (Kg) | 4.4 |
Cooling | Natural bottom to top |
Dimensions | 478 mm (W) x 44 (H) x 300mm (D) |
Maximum Voltage Gain | 34 dB |
Sensitivity | 0.775 V |
STBY power | 14 W |