TDX1000 (preliminary)

KEY FEATURES

• 2×300 W+ 1 x 500 W @ 4 ohm
• 3 channel D class power amplifier
• 48kHz DSP 24-bit ADC/DAC
• Overload and short-circuit protection
• EXT mute ( 2pin, NO, NC )
• EXT Gain control ( 3pin 5V,Gain,GND ), – 60…0 dB use VC-1
• Hidden USB, use TDX control software
• Master gain on front -60…0 dB
• Sub gain -6…+6 dB on front
• Optional power save mode ( 1,5w power consumption )
• input; routing, priority, 4PEQ, gain
• output; 4PEQ, gain, limiter

DESCRIPTION

TDX-Series are state of the art digital amplifiers for professional system integrators companies, who require maximum performance and sound quality. This 2.1 configuration gives you very fast setup in cafe, lounge or pubs with top and sub cabinets. External gain control can be used to control the volume on each amplifier in each zone.

TDX-Series amplifiers are based on a modern, high-performance D class topology. This topology provides high efficiency, low heat generation, large output power and together with a switching power supply – light weight and small dimensions. The amplifiers use active fan controlled cooling system common to all channels. The airflow direction is from front to back. The amplifier is equipped with a full set of modern protection systems. These include short circuit protection, thermal protection, DC and high frequency speaker protections. The internal DSP is easy to program via the hidden USB port on the front of the device, after programming the USB will be covered by the front panel, protected from unauthorized use. We have implemented External GAIN and External MUTE to meet the requirements of most of the installs. You can easily connect SevenSound’s VC-1 volume control to adjust the gain in that area from 0 to -60 dB from maximum set volume. All parameters can be set by TDX-control a very easy to use PC software that runs instantly.